QF_ATS_Mech. Automobile (APE).pdf

Mechanic Automobile (Advanced Petrol Engine) (ATS)

  • Job Description Checks Petrol engine to locate defects, repairs, services and overhauls it for correct performance. Measures essential parts using appropriate tools, fits and taps pistons in cylinders, replaces/ repairs worn out or damaged parts and reassembles them as necessary to ensure accuracy of fit. Installs assembled or repaired petrol engine in position, starts it, tunes it precisely and runs it at prescribed standard making necessary adjustments. Observes different readings such as temperature, fuel level, oil pressure etc. for optimum performance. Checks, adjusts and lubricates petrol engine equipments periodically and performs other operations to keep petrol engine in good working order.  
  • SectorAutomotive
  • NSQF LevelLevel 5
  • Notional Hours4120
  • Accrediting BodiesDirectorate General of Training (DGT)
  • Certifying BodiesDirectorate General of Training (DGT)
  • Proposed Occupation

    Mechanic Automobile (Advanced Petrol Engine) has a wide scope of Employability ranging from self-employment, contractual employment to Industrial jobs. On successful completion of this course, the candidates shall be gainfully employed in the industries for following occupations:

     

    • Mechanic, Petrol Engine
     
  • Planned arrangements for RPL
    1. Only those candidates will be allowed to appear in the Test conducted by NCVT as Private candidate who have already acquired the National Trade Certificate.
    2. Three (03) years experience of the candidates wishing to appear as Private candidate after obtaining NTC should be in the same trade in which he proposed to acquire the National Apprenticeship Certificate.
    3. Private candidates possessing the minimum educational qualification required for engagement as an apprentice in that particular trade and the minimum experience as stated above would only be permitted.
    4. Candidates are to be sponsored by an establishment and should not be entertained directly.
    5. Only, the experience acquired by the candidate in an establishment implementing the Apprentices Act, 1961 should be considered and such certificate should be issued by the Officer In-charge of Training of that establishment.
     
  • Qualification File QF_ATS_Mech. Automobile (APE).pdf
  • Supporting Documents
  • Formal structure of the qualification
    Title of unit or other component Estimated size (Hours) Level
    Plan & perform basic fastening and fitting operations using various tools and equipments used in automotive workshop. 150 4
    Trace and test simple electrical components and circuits and assemble to ensure functionality of system. 150 4
    Diagnose and troubleshoot the cooling system faults, repair/replace the defective components and check functionality of system. 210 5
    Diagnose and troubleshoot the lubricating system faults, repair/replace the defective components and check functionality of system. 210 5
    Trace and test charging system circuits, service the charging system components and check for its functionality. 220 5
    Trace and test starting system circuits, service the charging and ignition system components and check for its functionality. 220 5
    Diagnose fuel system faults and repair/replace the components. 180 5
    Overhaul and service the vehicle air conditioning system components and check functionality of system. 220 5
    Total (Block-I) 1560 5
    Diagnose engine problems by carry out vacuum, compression and oil pressure tests and concluding the results. 100 5
    Plan and overhaul petrol engine and check functionality and perform engine tune up. 150 5
    Trace and test electronic components and circuits and assemble to ensure functionality of system. 120 5
    Test functionality of multi point fuel injection components of petrol vehicle and repair/replace defective components. 120 5
    Diagnose the problems with intake and exhaust system components and repair/replace the defective components. 100 5
    Perform service and overhauling of transmission system and repair/replace defective components. 100 5
    Diagnose automatic transmission wiring system problems, test and analyse test report for proper functioning. 100 5
    Carry out overhauling of vehicle chassis system includes steering, suspension and braking system and check functionality. 150 5
    Diagnose power steering system problems and service the components and check for its functionality. 100 5
    Diagnose and trouble shoot Anti-Lock System problem of a vehicle. 100 5
    Carry out removal, repair and assembling, wheel balancing activities of tyres and tubes of a vehicle. 80 4
    Diagnose problems with vehicle comfort systems and test for its functionality. 110 5
    Diagnose LPG system problems test the components and check its functionality. 70 4
    Diagnose CNG system problems test the components and check its functionality. 90 5
    Identify the components of electric and hybrid vehicle components. 70 4
    Total (Block-II) 1560 5
    Basic Training, internal assessment and Examination 1000 5
    Total 4120 5